Welcome to BFA Tractors & Parts - We are Dealer & Manufactures for some of the best parts in Mini Pulling Tractor pulling.
We are authorized dealers for
Dick Cepek Tires
We are the Lawntec authorized dealer for Tennesse
For the guys wanting to run fuel injected motors we offer rework of the wiring harness - when you get the harness back it will be stripped of unnecessary wiring, the anti rev will be bypassed, it can be hooked up to a toggle switch and the key switch from the bike is no longer needed - you will only need to hook up a couple of wires and the rest is plug and play
For anyone that uses the 60 series chain for the motor to the jackshaft we will adding to the following list of custom sprockets, here's the new list. These are case harden sprockets, not home made ones.
YAMAHA = 11, 12, 13 TOOTH
KAWASAKI = 11, 12, 13, 14, 15 TOOTH
SUZUKI = 11, 12, 13, 14, 15 TOOTH
Pictures of some of the parts that we offer for sell
We are dealers for the following
Douglas Wheel - Real Wheels - Dick Cepek - Lawntec - Dyna2000 - Yoshimura - Sudco - Carb Parts Whse - Sprocket Specialist - Azusa -
We also offer chain and sprockets, do custom metal fabrication & sheet metal forming
MY CURRENT PROJECT
Farmin For Fun
Tractor is for sale upon completion
click on picture for enlarged picture
this is an in progress project - this tractor will be for sale at the completion - it will also have the original light bar with head light - the hood will raise and lower with an electric actuator - motor is a 2007 gsxr 750 that will run on fuel injection - steering will be like an original going down to a rack and pinion - tires will be lawntechs with 8" tri-ribs on aluminum wheels on the front - air cleaner will be mounted to the hood and exhaust will come thru hood will an original style muffler and flapper on it - hand throttle on steering column will operate the hand brake - seat is from a massey ferguson 135
- for info email me at suthrn@skhr.net or call Dave at 270-317-1034, leave message if I miss you and I'll call you back
THIS IS PICTURES OF THE CHAIN CATCHER THAT IS USED AT THE GRAYSON CO. PULLS
This has to be constructed out of at least 11ga - 1"x1" tubing or out of 1/4" plate steel - it needs to come behind the tires by 8" and have a 3"x3" skid plate mounted to the bottom at a maximum of 5" off the ground - the cross bar that connects the two sides has to be a minimum of 16" off the ground to the top - may be either bolted or welded to the tractor - anyone from an outside club will be able to pull 1 time before being required to have the catcher installed - any questions please call Homer Aubrey @ 270-259-3097
INDOOR MOTORCYCLE POWERED TRACTOR PULL
The date is November 28, 2008 at 2:00 p.m. The pull will be held at the Muhlenberg County Agriculture and Convention Center in Greenville, Ky. This is a indoor heated facility. The entry fee will be $20.00. The length of the track is 225 feet.
750 cc at 1250 lbs
Small Tire Open Class at 1300 lbs
Light Outlaw at 1350 lbs
Heavy Outlaw at 1400 lbs (tire size is whatever can fit on a 15 inch rim)
If you need more information, contact John Waldrop at this email address ( jc.waldrop@hotmail.com
) or call at 270-889-4690.
Tractor for Sale
$6500
1000cc GSXR Suzuki fuel injected - new 26x12x12 Lawntec's on 10" Douglas rims on rear- 3.50x8 tri ribs on Douglas rims on front - fresh paint - comes with weights and ready to pull - for more info contact Dave at 270-317-1034 or email to dave@bfapullers.com
Tractor Pulling Sled For Sale
selling due to building new sled this winter
Self propelled pulling sled for 1/4 scale tractors and 4 cylinder mini rods
Sled weights approx. 6000 lbs. This sled has two transmissions to run the box. It has a hydraulic axle infront to steer it with. Sled has a 5'x7' pan, a 2.8 litre - 4 cylinder motor that is fuel injected. We pull tractors as light as 650 lbs and up to 1400 lbs mini rods. Sled is well known in the western portion on Ky. Also included with this pulling sled is a set of scales, Rebco that can weight to 4000 lbs. Scale pad is 5'x10' that weights in 2 lb increments.
click on links below to see sled in action or for more info call James Aubrey at 270-259-3097
click on a name below to see sled in action
Grayson Co.Pulling Association
Click on name to see clip, may take a second to download
Chrash - Hookster -Tyler - J R - Timmy - Allen - Dakota - Brandon - J R - Timmy - Brandon - Chrash - Allen - Dakota - Tyler - Hookster
Des Moines
Spring Shoot Out
2008
CLIPS OF TRACTORS PULLING
clip on tractor clip too open - might have to download Quicktime 7 player
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20
21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40
41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60
61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71
Places we have built for and have pulling in
Alabama-1, Florida-1, Georgia-1, North Carolina-1, Missouri-1, Illinois-1, Minneasota-1, Wisconsin-1, Indiana-2, Kentucky-14, Tennesse-5, Connecticut-1, Rhode Island-1, Ontario Canada-1, North Carolina-1, New York-2, Ohio-1, Michigan-3, West Virgina-1, Mississippi-2, Louisiana-3 and soon - Indiana-2, Kentucky-3 and the country of New Zealand
Pictures of tractors we built
Lil Miss Massey
This is a picture of one of the tractors that we are built for the 250cc - 750 lbs motorcycle class - 8" in wheel, 18-9.50-8 tire size limit - we will have 2 classes 0-16 yr old and an adult class - motor is off an kawasaki ex250 ninja - powertrain is chain with a jackshaft for double reduction - the 11 yr old that owns this has gotten up to 8 mph pulling an 8200 lb sled - anyone wanting to learn more about this class, interested in buying or needs help setting one up contact me, I'll be very glad to help. Good class to learn young kids on before stepping them up to the bigger motor classes.
Ole Glory
Mike Hooks
INFERNO - John Piper
%20(Medium).JPG)
%20(Medium).JPG)
Greg Sayles
new cub cadet hot rod
John Deere - Larry Houck
Mr. T - Keith Tucker
Al Capone - Tim Taylor
Blue Thang - John Holiday
Lil T - BFA Pullers
Suicidal Tendencies - Dave Melton
Kubota - Kenneth Mohler
Bubba - Dave Melton
Born to be Wild - Chase Mohler
Wheel Horse -Robert White
HOG WILD - Daryl Tabor
Other Tractors
This is a picture of our shop - we build alot of the parts in house for quality control
Please check out our left side bar for the parts & tractors that we offer for sale & build
To contact us
email: dave@bfapullers.com
Dave:270-317-1034 or Keith: 270-765-2301
leave message if no answer
our mailing address is:
BFA PULLERS
320 EAST DIXIE HWY
ELIZABETHTOWN,KY 42701
Phone 270-317-1034
Pictures of some of our toys that we build
For more pics of the Mini Choppers click here
GRAYSON CO. PULLING ASSOCIATION
Here is a link for anyone looking for a tapes of pulling events
Life & all it entails, generally is determined by how we look at it, Concentrate on what we can change & control instead of worrying about that which we can't, you may soon find out life isn't all that bad, remember there's always someone that's got it worse than you & they're still making do, it's all about attitude.
If all you ever do is the best you can then you've done something to be proud of! - ( Montgomery Gentry )
